Gate Fitters Newcastle

Newcastle Gate Installation & Repair

Newcastle Gate Fitters (NE1): From a small, simple, wood garden gate up to an automatically controlled, electric driveway gate, an experienced gate fitting technician will be able to give guidance and experience with all areas of your project in Newcastle.

Gate Fitting Quotes

Perhaps it is that your existing gate has rotted away and needs replacing, or maybe you want to have a brand new gate installed to a recently built drive or pathway. A reliable Newcastle installation company can give a survey of the area to make certain you are offered the proper choice in your style and function of gate. After your site survey has been carried out you'll be offered a detailed quotation for the installation of the gate you have chosen, so that you can compare with other quotes that you have got.

Gate Fitters Newcastle Tyne and Wear

If your project involves the fitting of a driveway gate and you're looking to get a solar powered or electric installation, your local Newcastle gate fitting company will be able to help with this too. Fetching professionals in to do this type of work is essential due to a number of health and safety factors which must be taken into consideration. Any individual installing this kind of gate must be informed about the legislation for the Newcastle area, and must be capable of installing your gate correctly and safely.

You need to consult with the gate fitter before fitting any kind of electrically powered gate, that your chosen gate complies with Machine Directive 2006/42/EC and that a stringent risk assessment has been done in keeping with British Standards. In order to comply with these standards your new electric gate must have a minimum of two installed safety features that could be; pressure edges, light curtain devices or some other protection that controls the forces that effect the workings of the gate. In the event your installation does not abide by these minimum standards then you might be culpable in the event of any accident or injury attributable to your gate system.

Gate Fitting Newcastle (NE1)

There are trade organizations that a trained and competent gate installation service in Newcastle may be a member of. The Powered Gate Group and Gate Safe are the 2 primary bodies and they deal largely with electric powered gates. Both of them shine a light on integrity and professionalism in the gate installation industry through the proper maintaining of gates, correct and standardised installation techniques and adequate training from their membership. Additionally, they offer help and advice to gate users, industry professionals and gate fitters.

Basic gate fitting services in Newcastle will also usually be offered by the majority of local fencing companies. So, it might be worth calling several local fencing contractors to see what they can offer you, if you are having problems tracking down a gate installation specialist in Newcastle. Your installation requirements will clearly be based upon what type of gate you're in the market for. A fencing contractor, a gardener or even a handyman should be able to do the task if all you need is a run-of-the-mill wooden gate.

Garden Gates Newcastle (0191)

There are lots of gate fitters working in the Newcastle area, and as a way to uncover a reliable one you may use any one of several techniques. The aim would be to filter out rogues and bodgers. You need the outcome to be a first-rate gate fitting job which will impress your friends and neighbours. Some of the tactics that you can use are mentioned below.

Gate installation and repair can be done in Newcastle and also in: Felling Shore, South Gosforth, Shield Field, Byker, West Jesmond, Longbenton, Heaton, Kenton, Cowgate, Coxlodge, Benton, Shieldfield, Felling, Jesmond, Fenham, Forest Hall, Gateshead, Woolsington, and in these postcodes NE1 3BD, NE1 2PZ, NE1 1TS, NE1 3PE, NE1 3BA, NE1 1NA, NE1 3PD, NE1 1SQ, NE1 1UH, and NE1 2QP. Locally based Newcastle gate specialists will probably have the postcode NE1 and the dialling code 0191. Verifying this can guarantee you access local gate fitters. Newcastle home and business owners can benefit from these and many other gate related services.

Click For Gate Fitting Newcastle Tyne and Wear

Wrought Iron Gates Newcastle

Wrought Iron Gates Newcastle (NE1)

In recent years, gates made out of wrought iron have become really popular in Newcastle and throughout the UK. With driveways and gateways that provide access onto a public path or highway, wrought iron gates are the ideal choice. Often supplied with a ten year guarantee, wrought iron gates are exceedingly durable, and if properly looked after, will last considerably longer than that 10 year guideline. Wrought iron gates are available in an enormous array of patterns and designs, so you should have no problem obtaining one which floats your boat. Unless of course you're fortunate enough to have a standard sized gate opening, you'll most likely need to have your wrought iron gate custom made (bespoke).

What are Standard Sizes of Gates?

Standard gate sizes in the UK can differ based on the purpose and location of the gate. Below are some common sizes for different types of gates.

  1. Pedestrian Gates: Facilitating foot traffic, pedestrian gates are specifically designed for people to pass through. Around 900mm to 1000mm (35 to 39 inches) is the typical standard width of these gates. The height of pedestrian gates can vary, but it is often around 1.8m (6 feet) or less.
  2. Single-Leaf Driveway Gates: Single-leaf driveway gates are intended for vehicles to pass through. A single-leaf gate typically has a standard width of 3-4m (10 to 13 feet). The usual height range for these gates is around 1.2 - 1.8m (4 to 6 feet).
  3. Double-Leaf Driveway Gates: Double-leaf driveway gates are composed of two gate leaves that come together in the center when closed. Generally, the standard total width for double-leaf gates falls within the range of 3.5 to 6 metres (12 to 20 feet), with each leaf measuring approximately 1.5 to 3 metres (5 to 10 feet) in width. The height typically mirrors that of single-leaf gates, approximately 1.2 to 1.8 metres (4 to 6 feet).

It is important to note that these are general standard sizes, and custom sizes are also available to accommodate specific requirements. The appropriate size, taking into account the available space, intended use, and individual preferences, can be determined with the assistance of gate fitters and builders.

When preparing for a gate installation in Newcastle, it is recommended to engage with specialists who can evaluate the site and offer accurate measurements for a precise fit and efficient operation.

Driveway Gates

Driveway Gates Newcastle (NE1)

If you need to safeguard and secure your driveway in Newcastle, yet keep your front entrance looking stylish, driveway gates are available in a whole host of designs and materials, to match any scenario. Timber gates look terrific in almost any setting and can be solid or open faced, according to your preferences. Wrought iron gates with small spikes or studs create an additional level of security, but do not need to look intimidating to visitors, or you can opt for smooth lines for a contemporary entrance.

Hanging gates is work that's way beyond the skillsets of an average do-it-yourself person in Newcastle. A skilled gate fitter is recommended due to the extreme stress on hinges and gate posts exerted by a driveway gate. To avoid serious problems with driveway gates drifting out of alignment, their weight must be factored-in during assembly and installation and the correct fixings used. Hiring a skilled Newcastle gate fitter will ensure you have years of trouble free service from your new driveway gates.

Automatic Gates

Electric Gates Newcastle Tyne and Wear

Though not exclusively, automatic electric gates are mostly used for securing driveways. While now and again run on solar technology when the location and conditions are suitable, electrical gates are mainly powered by mains electricity. Automatic gates can be made from metal or wood and prove to be a convenient and secure alternative for properties in Newcastle. Electric gates can be operated from under the ground or by hydraulic rams, the workings can even be concealed within the stile. Expert installation of such gates is of the utmost importance since there are stringent regulations that must be conformed to when fitting these kinds of gates.

Ledged & Braced Gates

One of the most affordable and popular kinds of gate for normal usage in the garden is the wooden ledge & brace gate. A superior quality ledge & brace gate will give good service for many years, and will traditionally be built from Swedish redwood clad with palisade, tongue and groove, feather edge, or open pale boards. Ledged & braced gates are normally tanalised (pressure treated) to prevent fungal decay but ought still to be given a coat of Fence Life (or similar) every year or two for additional protection. Fitting ledge and brace gates with hook and band hinges is advised if you'd like them to function at their best.

Gate Fitters Near Newcastle

Also find: Felling Shore gate fitters, Fenham gate fitters, Kenton gate fitters, Coxlodge gate fitters, Cowgate gate fitters, Forest Hall gate fitters, West Jesmond gate fitters, Longbenton gate fitters, Shield Field gate fitters, Felling gate fitters, Jesmond gate fitters, Shieldfield gate fitters, Byker gate fitters, South Gosforth gate fitters, Woolsington gate fitters, Benton gate fitters, Gateshead gate fitters, Heaton gate fitters and more. It is possible to get gates fitted in all these localities. The expertise, brought by these seasoned wood wizards, ensures precise and professional gate installation on your property. These experts not only offer installation but also provide advice on the best sort of gate to suit your property's needs, whether it's for visual appeal, enhanced security, or both. If you're a local property owner looking to obtain accurate and competitive gate installation quotes tailored to your particular needs, you simply have to click here.

Gate Fitting Tasks

Gate Fitting Tasks Newcastle (0191)

Newcastle gate fitters can generally help with gate post installation, the fitting of garden gate locks, driveway gate installation in Newcastle, hardwood driveway gates, automated gate refurbishment Newcastle, factory gate installation Newcastle, wrought iron gate installation, remote controlled gate installation, metal driveway gates Newcastle, ledge and brace gate installation, electric gate installation, security gate fitting Newcastle, swing gates, cedar gate installation, the installation of wooden gates, gate replacement, field gate fitting, wooden gate repairs, commercial gate fitting, arch and brace gate installation, palisade gate fitting Newcastle, the installation of metal gates, metal gate repairs, automatic gate fitting Newcastle, gate restorations, bespoke garden gates Newcastle, gates and railings, composite garden gates Newcastle, cheap gate fitting in Newcastle, gate refurbishment, small gates, the fitting of gate latches, gate repairs, bow top gate installation Newcastle, garden gates Newcastle and other gate related tasks in Newcastle, Tyne and Wear. Listed are just some of the activities that are undertaken by local gate fitters. Newcastle professionals will be happy to tell you about their full range of services.

TOP - Gate Fitters Newcastle

Gate Fitting Newcastle - Gate Fitting Quotations Newcastle - Timber Gates Newcastle - Gate Installation Newcastle - Driveway Gate Installers Newcastle - Gate Repairs Newcastle - Garden Gates Newcastle - Metal Gates Newcastle - Gate Measuring Newcastle

HOME - GATE FITTERS UK

(This gate fitters Newcastle page was revised and updated on 23-12-2024)

and more and more and more and more and more and more and more